Troubleshooting
Find the message or symptom you see. Each entry says why it happens, what to check and how to fix it.
In short
On this page you can
- Find out why a failed run created no task, or too many.
- Bring back tasks that disappeared from the board after a status change.
- Fix status errors: in use, already exists, Admin only.
- Solve attachment, comment and saving errors in the task window.
How to use it
- Copy the exact message you see.
- Find it below; the section names follow the page: board, task, automatic tasks, statuses.
- Check the listed points in order.
- Apply the fix and reload the board.
Board and list#
Tasks vanished from the boardBoard
- Why
- A task keeps its status as a name. If an Admin renamed that status in Task Settings, no column shows the old name any more, so its tasks drop off the board. See Rename or recolour.
- Check
- Switch to List and clear the filters. The missing tasks are there, with the old status name as plain text instead of a coloured chip. The list’s result count is higher than the board’s (why).
- Fix
- Either rename the status back, or open each task from the list and pick a current status. Next time, move the tasks before renaming.
The board or list is empty although tasks existBoard
- Why
- Filters are remembered in your browser, so a filter set last week still applies. Or another project is selected.
- Fix
- Open Filter and click Clear all, clear the search box, and unselect the member avatars. Check the project in the header. See how filters combine.
A card jumps back after I drop it: “An error occurred while processing your request. Please try again.”Board
- Why
- The new status could not be saved: the session expired, the connection dropped, or the task was deleted by someone else meanwhile.
- Fix
- Reload the page and try again. The same message also appears when creating or saving a task fails; log in again if it repeats.
Columns jump back after I reorder themBoard
- Why
- Column order is saved for everyone, so only Admins can change it.
- Fix
- Ask an Admin to drag the columns. Card order inside a column is personal and works for everyone, but it is kept in your browser only. See Move a task.
“Failed to load tasks. Please try again.”Board
- Fix
- Click Retry. If it keeps failing, log in again. A User without access to the project sees an empty board instead; ask an admin for project access.
New Task is greyed out: “Please select a project”Board
- Fix
- Select a project in the header. Tasks always belong to a project.
“Task could not be deleted --> …”Board
- Why
- The task no longer exists in this project (someone deleted it), or the request failed.
- Fix
- Reload the board. If the task is still there, try again. Consider moving it to Closed instead: deleting cannot be undone.
Task window#
“Please fill in task name.”Task
- Fix
- Type a Name; it is the only required field. See Create a task.
I can’t add attachments, tags or commentsTask
- Why
- The task is not saved yet. The hints say “You can add attachments after the task is saved.”, “Tags can be added after the task is saved” and “Please save the task first to add comments.”
- Fix
- Paste screenshots with Ctrl/Cmd + V now (they upload after saving), click Save, then open the task to add files, tags and comments.
“Unsupported file format. Supported formats: PNG, JPG, GIF, WEBP, PDF, DOC, DOCX, XLS, XLSX, TXT, CSV”Task
- Fix
- Convert the file, for example save a log, HAR or JSON file as
.txt, or attach a screenshot instead. ZIP archives and videos are not accepted; BMP and SVG are. See Attachments.
“Error uploading attachment.” or “Error deleting attachment.”Task
- Fix
- Try again; check your connection. Very large files take long to upload; a screenshot or a shorter log is often enough.
“Error updating task field. Please try again.”Task
- Why
- In a saved task each change saves at once; this one failed.
- Fix
- Close and reopen the task to see what was saved, then change the field again.
“Task could not be loaded. Please try again.”Task
- Fix
- Close the window and open the task again from the board.
“Task not found.”Task
- Why
- The shared link (
?task=…) points to a task that was deleted, or that belongs to another project. - Fix
- Select the right project in the header and open the link again, or search the task by name.
I can’t edit the description of an automatic taskTask
- Why
- The failure report of an automatic task is read-only so the evidence stays intact.
- Fix
- Add your findings as a comment, and rename the task to the real problem.
“Comment cannot be empty”, “Error creating comment” or “Couldn't load comments. Please try again.”Comments
- Fix
- Type some text before Send. For the other two, click Retry or reopen the task. You can only edit or delete your own comments.
A member says they got no notificationTask
- Why
- Notifications go to people newly added, never to the person who adds them, and @mentions only reach people in your company.
- Fix
- Remove and add the member again, or @mention them in a comment. See Notifications.
Automatic tasks and Report#
A pipeline run failed but no task appearedAutomatic
- Check
- Auto Task Creation is on in the pipeline’s own settings. The project switch does not override a pipeline that has its own value. See Which switch counts.
- The run has finished. Tasks are created after the last test case ends.
- A test case ended with the result Failed. Stopped or skipped test cases create no task.
- It was a pipeline run, not a dry run in Automate.
- Your filters on the board do not hide it: the task is Open, Medium, unassigned.
- Fix
- Switch the option on in the pipeline, save it and run it again. For the run that already failed, use the Task button in Report.
The same failure creates a new task every runAutomatic
- Why
- Each failed run creates its tasks; SmartestQA does not check for an open task of the same test case.
- Fix
- Fix the cause or switch Auto Task Creation off for that pipeline until it is fixed. Close the duplicates with a comment linking the task you keep.
“Report not found.” after Go to ReportAutomatic
- Why
- The run’s report was deleted, or the run cannot be found any more.
- Fix
- The task’s description still holds the failed steps and errors, and the screenshot is in its attachments.
“Please fill in all required fields.” or “An error occurred while creating the task…” in ReportReport
- Fix
- Fill in the name (type, priority and status have defaults) and save again. If it still fails, create the task on the Tasks page and paste the report address into the description.
The task did not reach JiraIntegration
- Check
- The project’s Jira integration is on with Send Tasks to Jira.
- Automatic tasks are sent only after someone changes them.
- The Jira connection works (checked in Integrations).
- Fix
- Change any field of the task (for example add a member) to send it again. Connection problems are fixed in Integrations by an Admin. See Jira and Azure DevOps.
Statuses#
Add new Status fails, or I can’t open Task SettingsStatus
- Why
- Adding, renaming, reordering and deleting statuses is for Admins. A User sees an access-denied message, and Company Settings is not in their menu.
- Fix
- Ask an Admin. See Add a status and Roles.
“'In Review' status is used in 4 task(s). Please change the status of these tasks first.”Status
- Why
- A status can only be deleted when no task has it. The confirmation already warned “This status is used in 4 task(s)…”.
- Fix
- Filter the board by that status in each project and move the tasks, then delete again. See Delete a status.
“A status with this name already exists” or “Status already exists”Status
- Fix
- Names are unique in the company, ignoring case, and include the defaults: you cannot add a second “open”. Pick another name.
“Please enter a status name” or “Invalid color format. Please use #RRGGBB (e.g. #1976d2)”Status
- Fix
- Type a name, and a colour as
#plus six hexadecimal digits, or pick one with Select a color.
“Default statuses cannot be deleted”Status
- Fix
- Open, In Progress, Resolved and Closed belong to every company and stay. You can move them on the board. See Default and company statuses.
“Error loading statuses”, “Error adding status”, “Error updating status” or “Error deleting status”Status
- Fix
- Click Retry or reload Task Settings. If the board cannot load statuses it falls back to the four defaults, so your own columns are missing until the next successful load.
Didn’t find your answer?Write to support with your project name and what you see on screen.
info@smartestqa.ai