---
title: "Troubleshooting"
section: "Tasks"
description: "Fixes for SmartestQA Tasks: missing automatic tasks, tasks gone from the board, status errors, attachments, comments, and tasks raised from Report."
url: https://docs.smartestqa.ai/en/tasks-troubleshooting.html
audience: [customer, admin]
updated: 2026-11-08
keywords: "tasks error problem fix no automatic task duplicate tasks task vanished board status in use add new status access denied attachment unsupported file comment error task not found report not found jira"
---
# Tasks: Troubleshooting

Find the message or symptom you see. Each entry says why it happens, what to check and how to fix it.

## In short

**On this page you can**

- Find out why a failed run created no task, or too many.
- Bring back tasks that disappeared from the board after a status change.
- Fix status errors: in use, already exists, Admin only.
- Solve attachment, comment and saving errors in the task window.

**How to use it**

1. Copy the exact message you see.
2. Find it below; the section names follow the page: board, task, automatic tasks, statuses.
3. Check the listed points in order.
4. Apply the fix and reload the board.

## Board and list

### Problem: Tasks vanished from the board _(Board)_

- **Why:** A task keeps its status as a name. If an [Admin](https://docs.smartestqa.ai/en/company-settings-roles.html) renamed that status in [Task Settings](https://docs.smartestqa.ai/en/company-settings-task-settings.html), no column shows the old name any more, so its tasks drop off the board. See [Rename or recolour](https://docs.smartestqa.ai/en/tasks-statuses.html#edit-status).
- **Check:** Switch to [List](https://docs.smartestqa.ai/en/tasks-board.html#list) and clear the filters. The missing tasks are there, with the old status name as plain text instead of a coloured chip. The list’s result count is higher than the board’s ([why](https://docs.smartestqa.ai/en/tasks-numbers.html#results-found)).
- **Fix:** Either rename the status back, or open each task from the list and pick a current status. Next time, move the tasks before renaming.

### Problem: The board or list is empty although tasks exist _(Board)_

- **Why:** Filters are remembered in your browser, so a filter set last week still applies. Or another project is selected.
- **Fix:** Open **Filter** and click **Clear all**, clear the search box, and unselect the member avatars. Check the project in the header. See [how filters combine](https://docs.smartestqa.ai/en/tasks-board.html#filter-logic).

### Problem: A card jumps back after I drop it: “An error occurred while processing your request. Please try again.” _(Board)_

- **Why:** The new status could not be saved: the session expired, the connection dropped, or the task was deleted by someone else meanwhile.
- **Fix:** Reload the page and try again. The same message also appears when creating or saving a task fails; log in again if it repeats.

### Problem: Columns jump back after I reorder them _(Board)_

- **Why:** Column order is saved for everyone, so only [Admins](https://docs.smartestqa.ai/en/company-settings-roles.html) can change it.
- **Fix:** Ask an Admin to drag the columns. Card order inside a column is personal and works for everyone, but it is kept in your browser only. See [Move a task](https://docs.smartestqa.ai/en/tasks-board.html#move).

### Problem: “Failed to load tasks. Please try again.” _(Board)_

- **Fix:** Click **Retry**. If it keeps failing, log in again. A User without access to the project sees an empty board instead; ask an admin for [project access](https://docs.smartestqa.ai/en/company-settings-roles.html).

### Problem: **New Task** is greyed out: “Please select a project” _(Board)_

- **Fix:** Select a project in the header. Tasks always belong to a project.

### Problem: “Task could not be deleted --> …” _(Board)_

- **Why:** The task no longer exists in this project (someone deleted it), or the request failed.
- **Fix:** Reload the board. If the task is still there, try again. Consider moving it to **Closed** instead: [deleting cannot be undone](https://docs.smartestqa.ai/en/tasks-board.html#delete).

## Task window

### Problem: “Please fill in task name.” _(Task)_

- **Fix:** Type a **Name**; it is the only required field. See [Create a task](https://docs.smartestqa.ai/en/tasks-detail.html#new-task).

### Problem: I can’t add attachments, tags or comments _(Task)_

- **Why:** The task is not saved yet. The hints say “You can add attachments after the task is saved.”, “Tags can be added after the task is saved” and “Please save the task first to add comments.”
- **Fix:** Paste screenshots with `Ctrl`/`Cmd` + `V` now (they upload after saving), click **Save**, then open the task to [add files](https://docs.smartestqa.ai/en/tasks-detail.html#attachments), tags and comments.

### Problem: “Unsupported file format. Supported formats: PNG, JPG, GIF, WEBP, PDF, DOC, DOCX, XLS, XLSX, TXT, CSV” _(Task)_

- **Fix:** Convert the file, for example save a log, HAR or JSON file as `.txt`, or attach a screenshot instead. ZIP archives and [videos](https://docs.smartestqa.ai/en/report-steps.html#video) are not accepted; BMP and SVG are. See [Attachments](https://docs.smartestqa.ai/en/tasks-detail.html#attachments).

### Problem: “Error uploading attachment.” or “Error deleting attachment.” _(Task)_

- **Fix:** Try again; check your connection. Very large files take long to upload; a screenshot or a shorter log is often enough.

### Problem: “Error updating task field. Please try again.” _(Task)_

- **Why:** In a saved task each change saves at once; this one failed.
- **Fix:** Close and reopen the task to see what was saved, then change the field again.

### Problem: “Task could not be loaded. Please try again.” _(Task)_

- **Fix:** Close the window and open the task again from [the board](https://docs.smartestqa.ai/en/tasks-board.html#kanban).

### Problem: “Task not found.” _(Task)_

- **Why:** The shared link (`?task=…`) points to a task that was deleted, or that belongs to another project.
- **Fix:** Select the right project in the header and open the link again, or search the task by name.

### Problem: I can’t edit the description of an automatic task _(Task)_

- **Why:** The failure report of an [automatic task](https://docs.smartestqa.ai/en/tasks-from-runs.html#auto-task-content) is read-only so the evidence stays intact.
- **Fix:** Add your findings as a comment, and rename the task to the real problem.

### Problem: “Comment cannot be empty”, “Error creating comment” or “Couldn't load comments. Please try again.” _(Comments)_

- **Fix:** Type some text before **Send**. For the other two, click **Retry** or reopen the task. You can only edit or delete your own comments.

### Problem: A member says they got no notification _(Task)_

- **Why:** Notifications go to people *newly* added, never to the person who adds them, and @mentions only reach people in your company.
- **Fix:** Remove and add the member again, or @mention them in a comment. See [Notifications](https://docs.smartestqa.ai/en/tasks-from-runs.html#notifications).

## Automatic tasks and Report

### Problem: A pipeline run failed but no task appeared _(Automatic)_

- **Check:** 1. [**Auto Task Creation**](https://docs.smartestqa.ai/en/tasks-from-runs.html#which-setting) is on **in the [pipeline](https://docs.smartestqa.ai/en/schedule-create.html)’s own settings**. The project switch does not override a pipeline that has its own value. See [Which switch counts](https://docs.smartestqa.ai/en/tasks-from-runs.html#which-setting).
  2. The run has finished. Tasks are created after the last test case ends.
  3. A test case ended with the result Failed. Stopped or skipped test cases create no task.
  4. It was a pipeline run, not a [dry run](https://docs.smartestqa.ai/en/automate-dry-run.html) in Automate.
  5. Your filters on the board do not hide it: the task is **Open**, **Medium**, unassigned.
- **Fix:** Switch the option on in the pipeline, save it and run it again. For the run that already failed, use the [Task button in Report](https://docs.smartestqa.ai/en/tasks-from-runs.html#from-report).

### Problem: The same failure creates a new task every run _(Automatic)_

- **Why:** Each failed run creates its tasks; SmartestQA does not check for an open task of the same test case.
- **Fix:** Fix the cause or switch [**Auto Task Creation**](https://docs.smartestqa.ai/en/tasks-from-runs.html#which-setting) off for that [pipeline](https://docs.smartestqa.ai/en/schedule-create.html) until it is fixed. Close the duplicates with a comment linking the task you keep.

### Problem: “Report not found.” after **Go to Report** _(Automatic)_

- **Why:** The run’s report was deleted, or the run cannot be found any more.
- **Fix:** The task’s description still holds the failed steps and errors, and the [screenshot](https://docs.smartestqa.ai/en/report-steps.html#screenshots) is in its attachments.

### Problem: “Please fill in all required fields.” or “An error occurred while creating the task…” in Report _(Report)_

- **Fix:** Fill in the name (type, priority and status have defaults) and save again. If it still fails, [create the task on the Tasks page](https://docs.smartestqa.ai/en/tasks-detail.html#new-task) and paste the report address into the description.

### Problem: The task did not reach Jira _(Integration)_

- **Check:** 1. The project’s Jira integration is on with [**Send Tasks to Jira**](https://docs.smartestqa.ai/en/integrations-issue-trackers.html#jira-setup).
  2. Automatic tasks are sent only after someone changes them.
  3. The Jira connection works (checked in Integrations).
- **Fix:** Change any field of the task (for example add a member) to send it again. Connection problems are fixed in Integrations by an [Admin](https://docs.smartestqa.ai/en/company-settings-roles.html). See [Jira and Azure DevOps](https://docs.smartestqa.ai/en/tasks-from-runs.html#jira).

## Statuses

### Problem: **Add new Status** fails, or I can’t open Task Settings _(Status)_

- **Why:** Adding, renaming, reordering and deleting statuses is for Admins. A User sees an access-denied message, and [Company Settings](https://docs.smartestqa.ai/en/company-settings.html) is not in their menu.
- **Fix:** Ask an Admin. See [Add a status](https://docs.smartestqa.ai/en/tasks-statuses.html#add-status) and [Roles](https://docs.smartestqa.ai/en/company-settings-roles.html).

### Problem: “'In Review' status is used in 4 task(s). Please change the status of these tasks first.” _(Status)_

- **Why:** A status can only be deleted when no task has it. The confirmation already warned “This status is used in 4 task(s)…”.
- **Fix:** Filter the board by that status in each project and move the tasks, then delete again. See [Delete a status](https://docs.smartestqa.ai/en/tasks-statuses.html#delete-status).

### Problem: “A status with this name already exists” or “Status already exists” _(Status)_

- **Fix:** Names are unique in the company, ignoring case, and include the defaults: you cannot add a second “open”. Pick another name.

### Problem: “Please enter a status name” or “Invalid color format. Please use #RRGGBB (e.g. #1976d2)” _(Status)_

- **Fix:** Type a name, and a colour as `#` plus six hexadecimal digits, or pick one with **Select a color**.

### Problem: “Default statuses cannot be deleted” _(Status)_

- **Fix:** Open, In Progress, Resolved and Closed belong to every company and stay. You can move them on the board. See [Default and company statuses](https://docs.smartestqa.ai/en/tasks-statuses.html#defaults).

### Problem: “Error loading statuses”, “Error adding status”, “Error updating status” or “Error deleting status” _(Status)_

- **Fix:** Click **Retry** or reload [Task Settings](https://docs.smartestqa.ai/en/company-settings-task-settings.html). If the board cannot load statuses it falls back to the four defaults, so your own columns are missing until the next successful load.
