---
title: "Parameters & run settings"
section: "Schedule"
description: "Change step values per pipeline, loop over data, and set a SmartestQA pipeline's browser, retries, timeouts, recording, AI and e-mail notification settings."
url: https://docs.smartestqa.ai/en/schedule-settings.html
audience: [customer, admin]
updated: 2026-11-08
keywords: "pipeline parameters case default data and loop loop mode dataset table manual repeat count test management parallel execution thread count continue on failure retry count headless browser ai options email notification on failure selenium playwright settings jmeter settings"
---
# Schedule: Parameters & run settings

Everything right of the run list except the Schedule tab: which values the steps type in this pipeline, whether cases loop over data, and how the run behaves, from the browser to the e-mail that reports it.

## In short

**On this page you can**

- Give a step a different value in this pipeline without changing the test case.
- Repeat cases, loop over a dataset’s rows, or run the whole pipeline once per table row.
- Set browser, headless mode, retries, timeouts, video and screenshots per pipeline.
- E-mail the report always or only on failure, to the addresses you choose.
- Tune Selenium, Playwright, mobile, desktop and load-test options.

**How to use it**

1. Open Pipeline Parameters and filter by Changed in this pipeline or With a problem .
2. Type a new value; Back to case default undoes it.
3. Choose a Loop mode in Data & loop .
4. Open Test Management for browser, retries, timeouts and e-mail.
5. Click Save ; the next run uses the new values.

A new pipeline starts with a copy of the [project’s preferences](https://docs.smartestqa.ai/en/project-settings-test-management.html) ([defaults](https://docs.smartestqa.ai/en/schedule-create.html#defaults)). From then on its settings are its own: changing the project’s preferences later does not change existing pipelines, and changing a pipeline does not change the project. Every tab is saved with the pipeline’s **Save**.

| Tab | Shown for | Section |
| --- | --- | --- |
| **Pipeline Parameters** | All | [Pipeline Parameters](https://docs.smartestqa.ai/en/schedule-settings.html#pipeline-parameters), [Data & loop](https://docs.smartestqa.ai/en/schedule-settings.html#data-loop) |
| [**Test Management**](https://docs.smartestqa.ai/en/project-settings-test-management.html) | All | [Test Management](https://docs.smartestqa.ai/en/schedule-settings.html#test-management), [E-mail](https://docs.smartestqa.ai/en/schedule-settings.html#email) |
| [**AI Options**](https://docs.smartestqa.ai/en/project-settings-ai.html) | All | [AI Options](https://docs.smartestqa.ai/en/schedule-settings.html#ai-options) |
| [**Selenium Settings**](https://docs.smartestqa.ai/en/project-settings-engines.html#selenium) or [**Playwright Settings**](https://docs.smartestqa.ai/en/project-settings-engines.html#playwright) | WEB, by Script Language | [Browser settings](https://docs.smartestqa.ai/en/schedule-settings.html#browser-settings) |
| **Mobile Settings** / **Desktop Settings** | MOBILE / DESKTOP | [Mobile, desktop and load tests](https://docs.smartestqa.ai/en/schedule-settings.html#mobile-desktop-load) |
| **JMeter Settings**, **k6 Settings** or [**Load Test Settings**](https://docs.smartestqa.ai/en/report-load-tests.html#load-summary) | Pipelines with a load test step | [Mobile, desktop and load tests](https://docs.smartestqa.ai/en/schedule-settings.html#mobile-desktop-load) |

## Pipeline Parameters

This tab lists, case by case, the values your steps type or select ([Type, Clear & Type](https://docs.smartestqa.ai/en/automate-steps-browser.html#type) and [Select](https://docs.smartestqa.ai/en/automate-steps-browser.html#select) steps, and their mobile and desktop versions). Change a value here and only this pipeline uses it; the test case in Automate keeps its [own value](https://docs.smartestqa.ai/en/automate-editor.html#step-parameters), shown as **Case default**.

![Pipeline Parameters with one changed value.](https://docs.smartestqa.ai/media/shots/SCH-SHOT-07.png)

- **Counters**: “*n* parameters”, “*n* changed”, “*n* with a problem”.
- **Filters**: **All inputs**, **Changed in this pipeline**, **With a problem** (for example “Key not found”: the value refers to a [data key](https://docs.smartestqa.ai/en/data-source-variables.html) that does not exist).
- **Run uses**: the value the next run will use. “Run values shown for: TEST” tells you which environment the preview uses.
- **Back to case default**: drops your change for that value.
- **Show all parameters**: also lists step settings, not only typed or selected values (“Step settings are shown too.”).
- **Expand all** / **Collapse all** the cases.
- **Export**: **Download as Excel** (one column per input, one row of current values) or **Save as data source** (a one-row dataset in [Data Source › Datasets](https://docs.smartestqa.ai/en/data-source-datasets.html); the name must start with a letter and use only letters, digits and _). [Secret values](https://docs.smartestqa.ai/en/data-source-secrets.html) are never written to either.
- **Global Parameters**: lists the [values that steps of other cases produce](https://docs.smartestqa.ai/en/automate-steps-variables.html#global-parameter) (key, test case, description); add one to use it as a value. It warns when the value comes from a later step and may not exist yet.
- Badges: **NEW** for a parameter added since the last save, **DEL** for one whose step was deleted (“It will be removed when you save the schedule.”).

[Code steps](https://docs.smartestqa.ai/en/automate-steps-code.html) open the **Code Editor** or an **AI Prompt**; [mail steps](https://docs.smartestqa.ai/en/automate-steps-mail.html) open their own dialog. For a [sub-pipeline](https://docs.smartestqa.ai/en/schedule-create.html#sub-pipelines), use [**Edit Pipeline Parameters**](https://docs.smartestqa.ai/en/schedule-create.html#sub-pipelines) on its row instead. An empty pipeline says “Add a test case or requirement to view its parameters here.”

> **Note: Inputs for triggers, queues and tables**
>
> The values listed here are the pipeline’s **inputs**. A trigger, a queue item or a table row can fill them from outside; nothing else in the pipeline can be overwritten that way ([Pipeline inputs](https://docs.smartestqa.ai/en/schedule-triggers-queues.html#inputs)).

## Data & loop

At the top of Pipeline Parameters, **Data & loop** decides how often the cases run. Pick a **Loop mode**:

| Loop mode | What runs | Saved with |
| --- | --- | --- |
| **None** | “The pipeline runs once; each case runs once.” | The pipeline’s **Save** |
| **Loop** | “Cases that read a [dataset](https://docs.smartestqa.ai/en/data-source-datasets.html#loop) run once per row; the others run once” or the number of times you set. | The pipeline’s **Save** |
| **Table (manual)** | “Rows you type here; each row is a separate run of the whole pipeline.” | The table’s own save; needs the pipeline saved first (“Save the pipeline first to use a table.”) |

### Loop over a dataset

1. **Link a value to a dataset column**

   In the parameter list, click the table icon next to a value and pick a dataset column from [Data Source](https://docs.smartestqa.ai/en/data-source-datasets.html#use-in-steps). Pick the column header, not one cell: a fixed cell is always the same row (“always row 3”).
2. **Choose Loop**

   The card shows the dataset, “*n* cases loop over it”, “*u* of *t* columns used” and **Edit data**.
3. **Choose which rows**

   **Which rows**: rows in order (all, or the first N), all rows in random order, or N random rows. Random rows “are picked again on every run (scheduled runs too).”
4. **Set the others**

   “The *n* cases without a dataset run” 1 or more times “with the same values (constants and variables as they are)”.

   A line such as “15 case runs” shows the total. How it is counted: [Data & loop count](https://docs.smartestqa.ai/en/schedule-numbers.html#data-loop-count).

- All looping cases read the same rows in the same order in one run.
- Only Test rows repeat. Setup, Before, After and Teardown run as their [phase](https://docs.smartestqa.ai/en/schedule-create.html#phases) says; sub-pipelines use their own settings.
- If the pipeline’s environment has its own [copy of the dataset](https://docs.smartestqa.ai/en/data-source-datasets.html#dataset-environments), that copy is used (“environment copy of customers”).
- “Cases in this pipeline run with different repeat counts from an old setting” means rows have different counts; **Set to once** resets them.

### Run the whole pipeline once per row

In **Table (manual)** the columns are the pipeline’s inputs. Add a **Row** per run; an empty cell uses the pipeline’s value. Each row has **Enabled**, a **Label** and its **Last result**.

- **Run table** queues every enabled row: “5 rows queued for running”. **Run remaining only** runs the rows whose last result is not a success.
- Rows run one after another. “If a row fails, continue with the next” is on by default.
- The table runs from **Run table** and on the pipeline’s [schedule](https://docs.smartestqa.ai/en/schedule-timing.html#period): each scheduled start runs every enabled row.
- **Open run** on a row opens its [report](https://docs.smartestqa.ai/en/report-summary.html).
- No inputs yet: “This pipeline has no parameters that take a value. If you just added cases, save the pipeline first; their parameters appear here as columns.”

For records that arrive over time, from a webhook, an e-mail or an Excel upload, use a [queue](https://docs.smartestqa.ai/en/schedule-triggers-queues.html#queues) instead.

## Test Management

| Setting | What it does | New project default |
| --- | --- | --- |
| Script Language | Web engine: [Selenium or Playwright](https://docs.smartestqa.ai/en/project-settings-engines.html). Decides which browser settings tab appears. | Set for the project |
| Parallel Execution · Thread Count | “Run tests in parallel” and the thread count requested for the run. Thread Count cannot exceed the parallel threads of your company’s [licence](https://docs.smartestqa.ai/en/company-settings-billing.html) ([limits](https://docs.smartestqa.ai/en/schedule-numbers.html#thread-count)). | On · the licence’s limit, at most 3 |
| Continue On Failure | “Keep running after a failed test”. Off: the first failed test skips the rest ([with phases](https://docs.smartestqa.ai/en/schedule-create.html#phase-failures)). | On |
| Retry Count | “Retry failed tests”, 0 to 5 times. A retry starts a new browser at the start page. A [dry run](https://docs.smartestqa.ai/en/automate-dry-run.html#run-modes) never retries, whatever this value is. | 0 |
| Locale | “Language for logs and reports” | en-US |
| Auto Task Creation | “Auto-create a task on test failure” ([Tasks](https://docs.smartestqa.ai/en/tasks-from-runs.html#auto-task)) | Off |
| Screenshot On Fail | “Capture [screenshots](https://docs.smartestqa.ai/en/report-steps.html#screenshots) only on failed steps” | Off |
| Block Ads | “Block ad and tracking requests (recommended)”. Turn it off if your app needs a blocked domain. | On |
| Browser · Browser Version · Platform | Chrome; Firefox and Edge are listed but cannot be selected. | Chrome · Latest · Windows |
| Browser Locale | Browser language and date format, for example `en-US`, `de-DE` | en-US |
| Resolution · Headless Mode | Window size; headless runs without a visible browser. The server is always headless. | 1920x1080 · On |
| Skip Successful Logs | “Keep only failed step logs in reports” | Off |
| Video Recording | “Record a [video](https://docs.smartestqa.ai/en/report-steps.html#video) of the test run” | On |
| Wait Timeout (sec) | “Default element wait time”, 1–120 | 30 |
| Page Load Timeout (sec) | “Max page load wait time”, 1–120 | 120 |

The “New project default” column is what SmartestQA puts into a new project; an Admin may have changed the [project’s preferences](https://docs.smartestqa.ai/en/project-settings-test-management.html#defaults) since. A value above a limit is cut back to the limit when you save.

## E-mail notifications

In Test Management, under **Email Notification**:

1. **Turn it on**

   Switch on **Email Notification** (“Send the [test report by email](https://docs.smartestqa.ai/en/report-summary.html#email-after-run)”). It is off in a new project.
2. **Choose when**

   **Email Notification Mode**: **Always**, or **On Failure** (only runs with at least one failed case).
3. **Choose who**

   **Email To** and **Email CC** (“Multiple: a@x.com; b@x.com”). They start as the address of the person who created the project. **Email Subject** starts as “Test Execution Report”.

   One e-mail per run, when the run ends. With an empty Email To, nothing is sent.

[Slack, Microsoft Teams, Discord and WhatsApp messages](https://docs.smartestqa.ai/en/integrations-notifications.html) (pipeline started, completed, failed) and [outgoing webhooks](https://docs.smartestqa.ai/en/integrations-webhooks.html) are set per project in **[Integrations](https://docs.smartestqa.ai/en/integrations.html)**, not here. Queue item runs send no e-mail.

## AI Options

| Section | Settings |
| --- | --- |
| AI Features | **Enable AI** for this pipeline’s runs |
| AI Configuration | **AI Account**: [Smartest AI or Own Account](https://docs.smartestqa.ai/en/project-settings-ai.html#ai-account); with your own account the provider, model, base URL, API key, max tokens (1–8192) and temperature |
| AI Capabilities | **[Auto-Heal](https://docs.smartestqa.ai/en/maintenance-auto-heal.html)** (“Auto-heal locators”), **[Share Sensitive Data](https://docs.smartestqa.ai/en/project-settings-ai.html#data)** (off masks values before they reach the AI), **[AI Failure Analysis](https://docs.smartestqa.ai/en/report-ai-analysis.html#automatic-analysis)** (“Auto-analyze failed steps with AI”) |

Project-wide AI decisions (AI for locators, assessments, generating from the app) stay in the [project’s preferences](https://docs.smartestqa.ai/en/project-settings-ai.html#capabilities) and are not copied into pipelines. How healing works is described in **[Maintenance](https://docs.smartestqa.ai/en/maintenance-how-healing-works.html)**.

## Selenium and Playwright settings (web)

| Tab | Sections and settings |
| --- | --- |
| [**Selenium Settings**](https://docs.smartestqa.ai/en/project-settings-engines.html#selenium) | [Browser Options](https://docs.smartestqa.ai/en/project-settings-engines.html#selenium): Incognito Mode, Disable Notifications · Network & Identity: User Agent, Proxy Server · Security & Detection: Ignore Cert Errors, Disable Extensions, Disable Popup Blocking · Other: Custom Arguments |
| [**Playwright Settings**](https://docs.smartestqa.ai/en/project-settings-engines.html#playwright) | [Browser Options](https://docs.smartestqa.ai/en/project-settings-engines.html#playwright): Slow Motion (ms, up to 25,000) · Localization: Timezone, User Agent · Geolocation: Latitude, Longitude, Permissions · Proxy: Proxy Server, Proxy Bypass |

Only the tab of the pipeline’s Script Language is shown. Pipelines with a load test show the load-test tab instead.

## Mobile, desktop and load tests

- **Mobile Settings** (MOBILE projects): devices and app for the chosen [mobile target](https://docs.smartestqa.ai/en/schedule-where.html#mobile), for example [SmartTest Device Farm devices](https://docs.smartestqa.ai/en/agent-pool-devices.html#devices) per platform.
- **Desktop Settings** (DESKTOP projects): [desktop run options](https://docs.smartestqa.ai/en/project-settings-desktop.html#general); the application is chosen on the Schedule tab ([Desktop](https://docs.smartestqa.ai/en/schedule-where.html#desktop)).
- **JMeter Settings**, **k6 Settings** or **Load Test Settings** (both engines): per-pipeline load values. Fix values marked there before saving (“Fix the values marked on the JMeter Settings tab first.”). Load testing itself is described in **[Automate](https://docs.smartestqa.ai/en/automate-steps-load.html)**.

## If something goes wrong

- [No report e-mail arrives](https://docs.smartestqa.ai/en/schedule-troubleshooting.html#fix-no-email)
- [Thread Count jumps back to a lower number](https://docs.smartestqa.ai/en/schedule-troubleshooting.html#fix-thread-count)
- [“This pipeline has no parameters that take a value”](https://docs.smartestqa.ai/en/schedule-troubleshooting.html#fix-no-inputs)
- [Save shows a step error](https://docs.smartestqa.ai/en/schedule-troubleshooting.html#fix-step-errors)
