---
title: "Steps, screenshots & video"
section: "Report"
description: "Read one test case of a SmartestQA run: choose the run and retry, read each step’s status, log, durations and screenshot, open Log Detail, build a video, see saved variables and network reports."
url: https://docs.smartestqa.ai/en/report-steps.html
audience: [customer, admin]
updated: 2026-11-08
keywords: "test case tab steps log detail screenshot preview video create video iteration run retry first attempt total actual duration template user defined variable parameters network report convert to api steps convert to action task device metrics crashes"
---
# Report: Steps, screenshots and video

Each test case of a run has its own tab. It shows every step with its result and evidence, lets you switch between data iterations and retries, and links on to the screens where you fix things.

## In short

**On this page you can**

- Switch between a test case’s iterations ( Run ) and attempts ( Retry ).
- Read each step’s status, log, Total and Actual time and screenshot.
- Open Log Detail for the full message, API response and AI notes.
- Turn the screenshots into a video with Create Video , or play the device recording.
- See the variables steps saved, a Network step’s calls, and a device’s metrics and crashes.

**How to use it**

1. Click the test case’s tab, or its row in the Summary’s Test cases table.
2. Pick the iteration under Run and the attempt under Retry , if shown.
3. Find the red step in the table and click its row to open Log Detail .
4. Use Next step and Previous step to read around the failure.
5. Click AI Analyze , or Task to open a task with the evidence.

## Test case tabs

Next to **Summary**, the tab strip has one tab per test case, in [pipeline order](https://docs.smartestqa.ai/en/schedule-create.html#run-order). Each tab has a status icon in a small circle: passed (✓), failed (✕), running (▶, pulsing), passed with warnings (⚠) or not started (grey). Hover a tab for its full name and status. With many test cases the strip scrolls; **Summary** stays pinned on the left.

While the run is going, a tab’s status comes from its test case runs, so a test case shows as running until its last attempt ends. After the run, it comes from the steps. See [Case tab status](https://docs.smartestqa.ai/en/report-numbers.html#steps-chip).

![A test case tab with iterations and a retry.](https://docs.smartestqa.ai/media/shots/RPT-SHOT-04.png)

## Iterations, retries and execute count

The bar above the step table chooses which execution of this test case you are looking at.

| Control | Shown when | What it does |
| --- | --- | --- |
| Execute count chip | The [pipeline sets how often](https://docs.smartestqa.ai/en/schedule-settings.html#data-loop) this test case runs | Shows the count, or for a [data-source loop](https://docs.smartestqa.ai/en/schedule-settings.html#loop-dataset) the number of rows and the data source name (`3 · login_users`). Tooltip: “Execute count for this test case”. |
| **Run** | The test case ran more than once (data rows, execute count, [several devices](https://docs.smartestqa.ai/en/schedule-where.html#mobile)) | Pick iteration 1, 2, 3… When the same test case ran on different devices, the options are device names, with “· 2” for a second run on the same device. Arrow keys move between options. |
| **Retry** | An iteration failed and was [retried automatically](https://docs.smartestqa.ai/en/schedule-settings.html#test-management) | Pick **First Attempt**, **Retry** 1, **Retry** 2… Each option shows ✓ or ✕ for its result. |

The right of the bar shows a chip with passed steps out of all steps of the chosen attempt, for example `12/14` (see [Steps chip](https://docs.smartestqa.ai/en/report-numbers.html#steps-chip)). When the attempt has failed steps, two buttons appear: **Task** and **AI Analyze**. Mobile device runs also show **Device Metrics** and **Crashes** here.

## The step table

| Column | What it shows |
| --- | --- |
| Status | ✓ success, ✕ failed, ⚠ warning, ⌛ still running. A failed step that AI has analyzed also shows its [verdict chip](https://docs.smartestqa.ai/en/report-ai-analysis.html#verdicts). |
| Log | The step’s message from the runner. Web addresses in it are links. A step that AI turned into an action candidate shows [**Convert to Action**](https://docs.smartestqa.ai/en/maintenance-ai-steps.html#convert). |
| **Total** | From the start of the step until its result was recorded: finding the element, waiting, acting and taking the screenshot. |
| **Actual** | The time the action itself took, where the step measures it (for example the browser time, a wait, a database query, a JMeter run). Empty when not measured. |
| **Screenshot** | A thumbnail. Click it to browse all screenshots of this attempt. |

- **Templates.** Steps that came from a [template](https://docs.smartestqa.ai/en/automate-add-steps.html#add-template) are grouped under a **Template** header with “{count} steps”. Expand it to see them.
- **Several rows for one step.** One step can write more than one row, for example the action, an [AI analysis](https://docs.smartestqa.ai/en/report-ai-analysis.html) and an [auto-heal](https://docs.smartestqa.ai/en/maintenance-how-healing-works.html) note. All rows are shown, in time order.
- **Durations** show as `350ms`, `2.41s`, `1m 5s`, `1h 2m` or days.
- **Nothing logged.** “No logs found for this execution” means the attempt wrote no steps. If **Skip Successful Logs** was on in the [pipeline](https://docs.smartestqa.ai/en/schedule-settings.html#test-management), only failed steps were logged.

## Log Detail

Click any step row to open **Log Detail**.

1. **Read the message and the screenshot**

   **Log Message** has the full text (“No log message available” if the step wrote none). **Screenshot** shows the page at that moment; **Click to enlarge** opens **Screenshot Preview**, which has **Open in new tab** and closes with `Esc`.
2. **Check the status and durations**

   Status, **Total** and **Actual**, as in the table.
3. **Read the response (API, Kafka and Network steps)**

   **API Response** shows what the call returned. Long text can be expanded and collapsed. For a Network step it is a [network report](https://docs.smartestqa.ai/en/report-steps.html#network-report) instead.
4. **Read the AI notes**

   If the step was [analyzed](https://docs.smartestqa.ai/en/report-ai-analysis.html#analyze-a-failed-step): the verdict with its confidence, **AI Root Cause**, **Evidence** and **Suggestions**.
5. **Move around the failure**

   **Previous step** and **Next step** walk the rows in table order and wrap around at the ends.

## Screenshots

Clicking a thumbnail opens **Screenshots**, a viewer for every screenshot of the attempt with **Previous** and **Next** (“Use arrow keys to navigate”). Each image shows its step’s log under it.

Whether every step has a screenshot depends on the [pipeline](https://docs.smartestqa.ai/en/schedule-settings.html#test-management): with **Screenshot on Fail** only failed steps are captured. A thumbnail that cannot load shows “No screenshot available”.

## Video

The panel to the right of the steps (below them on narrow screens) shows the screenshots as a slideshow and offers a video.

| Run | Video |
| --- | --- |
| WEB, DESKTOP, mobile on [your agent](https://docs.smartestqa.ai/en/agent-pool-agents.html) or the [Device Farm](https://docs.smartestqa.ai/en/agent-pool.html) | Click **Create Video**. Your browser turns the screenshots into a video, one second per screenshot (“Processing {current} of {total} screenshots”). It is not saved: create it again next time, or save it from the player. |
| MOBILE on [AWS Device Farm](https://docs.smartestqa.ai/en/project-settings-mobile.html#aws) or [BrowserStack](https://docs.smartestqa.ai/en/project-settings-mobile.html#browserstack) | The provider’s recording of the device plays directly, labelled with the device, for example “Pixel 7 (Android 14)”. |

- While the run is going, the panel says “Please wait for the test to complete”.
- When **Video Recording** was off in the [pipeline](https://docs.smartestqa.ai/en/schedule-settings.html#test-management), there is no **Create Video** button.
- “No screenshots found” means the attempt has no screenshot to build from.

## AI Failure Analysis card

Under the video, the [**AI Failure Analysis**](https://docs.smartestqa.ai/en/project-settings-ai.html#what-each-switch-unlocks) card lists the analyzed failed steps of this test case, “{n} steps analyzed”, each with its verdict, confidence and root cause. Click one for the full analysis. See [Read the result](https://docs.smartestqa.ai/en/report-ai-analysis.html#read-the-result).

## User Defined Variable Parameters

Steps can [save values into variables](https://docs.smartestqa.ai/en/automate-test-data.html#produce-variables) during a run, for example an order number read from the page or an [API response field](https://docs.smartestqa.ai/en/automate-steps-api.html#extract-values). This card lists them for the chosen run: **Step**, **Variable** and its value (**Empty** when nothing was saved). Click a row for **Variable Parameter Details**. While the test case is running the card refreshes every few seconds. “User Defined Parameters Not Available” means this test case saved no variables.

Use it to see what a later step actually received when it failed with a wrong value.

## Network report (Network step)

A [Network step](https://docs.smartestqa.ai/en/automate-steps-network.html) records the browser’s calls. In **Log Detail** it shows the **Network report** instead of a raw response: a summary of calls, failed calls, JavaScript errors and console messages, then the matching calls with their request and response headers and bodies. Filters show only failed calls or only errors. Long bodies are marked “Shortened to fit the report”.

- **[**Convert to API steps**](https://docs.smartestqa.ai/en/maintenance-network-calls.html#make-api-test)** opens [**Network → API steps**](https://docs.smartestqa.ai/en/maintenance-network-calls.html#make-api-test): pick requests and they are added as [API Request steps](https://docs.smartestqa.ai/en/automate-steps-api.html) to a new test case in the same folder, ready for a [JMeter test](https://docs.smartestqa.ai/en/automate-steps-load.html). Masked secrets in bodies become `{{fieldName}}` [variables](https://docs.smartestqa.ai/en/automate-test-data.html#variables) that you fill in. It needs a Network step run in [“List” mode](https://docs.smartestqa.ai/en/automate-steps-network.html#list); otherwise “There are no requests to convert in this report…”.
- A link opens the same test case in [**Maintain** › Network Calls](https://docs.smartestqa.ai/en/maintenance-network-calls.html) (“Opens this test case in Maintain > Network Calls”).

## Convert to Action (AI steps)

When an [AI step](https://docs.smartestqa.ai/en/automate-steps-ai.html) passed and found a locator, its row shows [**Convert to Action**](https://docs.smartestqa.ai/en/maintenance-ai-steps.html#convert) (“Opens this step in Maintain > AI Steps”). It takes you to [**Maintain** › AI Steps](https://docs.smartestqa.ai/en/maintenance-ai-steps.html) with that step selected, where you turn it into a regular action that runs without AI. Steps that were already converted do not show the button.

## Open a task from a failure

1. **Click Task**

   Shown when the chosen attempt has failed steps. Tooltip: “Create a defect task”.
2. **Fill in the task**

   [Name, priority, status and type](https://docs.smartestqa.ai/en/tasks-detail.html#fields) are required (“Please fill in all required fields.”). Assign it to a [user of your company](https://docs.smartestqa.ai/en/company-settings-users.html).

   “Task created successfully. You can check it on the Tasks page.”

Pipelines with [**Automatic Task**](https://docs.smartestqa.ai/en/tasks-from-runs.html#auto-task) on create tasks for failures by themselves; those count as “from runs” in [InSight › Open tasks](https://docs.smartestqa.ai/en/insight-execution.html#open-tasks).

## Device Metrics and Crashes (MOBILE)

For a mobile run, two buttons sit above the step table. Their data comes from [SmartTest Device Farm sessions](https://docs.smartestqa.ai/en/agent-pool-devices.html#run-metrics), so they are empty for runs on other providers or [your own device](https://docs.smartestqa.ai/en/agent-pool-local-setup.html#connected-devices). **Device Metrics** shows the device’s temperature, battery, memory and CPU during the run. **Crashes** lists crashes, ANRs (app not responding) and native events, with a count on the button. Both follow the device of the chosen **Run**; the dialog subtitle names it, for example “Pixel 7 · 14”.

## Load test steps

A test case with [JMeter or k6 steps](https://docs.smartestqa.ai/en/automate-steps-load.html) shows the load test report in its tab, live while it runs. See [Load test results](https://docs.smartestqa.ai/en/report-load-tests.html#step-report).

## If something goes wrong

- [“No logs found for this execution”](https://docs.smartestqa.ai/en/report-troubleshooting.html#fix-no-logs)
- [“No screenshot available” / “No screenshots available”](https://docs.smartestqa.ai/en/report-troubleshooting.html#fix-no-screenshot)
- [No video, or “Please wait for the test to complete”](https://docs.smartestqa.ai/en/report-troubleshooting.html#fix-video)
- [“User Defined Parameters Not Available”](https://docs.smartestqa.ai/en/report-troubleshooting.html#fix-variables)
- [“Please fill in all required fields.”](https://docs.smartestqa.ai/en/report-troubleshooting.html#fix-task-fields)
- [“There are no requests to convert in this report…”](https://docs.smartestqa.ai/en/report-troubleshooting.html#fix-n2a-empty)
